Unit 1, 10-12 Montore Rd Minto NSW 2566 Po Box 5991 Minto NSW 2566 Ph: 02 9603 4022 Fax: 02 9603 7622

AC Input
IAC15	AC Input, 90-140 VAC, 15 VDC Logic
IAC15A	AC Input 180-280 VAC, 15 VDC Logic
IAC24	AC Input, 90-140 VAC, 24 VDC Logic
IAC24A	AC Input, 180-280 VAC, 24 VDC Logic
IAC5	AC Input, 90-140 VAC, 5 VDC Logic
IAC5A	AC Input, 180-280 VAC, 5 VDC Logic

	Click for data sheet

AC Output
OAC15	AC Output, 12-140 VAC, 15 VDC Logic
OAC15A	AC Output, 24-280 VAC, 15 VDC Logic
OAC24	AC Output, 12-140 VAC, 24 VDC Logic
OAC24A	AC Output, 24-280 VAC, 24 VDC Logic
OAC24H	AC Output 24-280 VAC, 24 VDC Logic, High Current
OAC5	AC Output, 12-140 VAC, 5 VDC Logic
OAC5A	AC Output, 24-280 VAC, 5 VDC Logic
OAC5A5	AC Output, 24-280 VAC, 5 VDC logic
OAC5H	AC Output I/O Module

	Click for data sheet

DC or AC Input
IDC15	DC or AC Input, 10-32 VDC or 12-32 VAC, 15 VDC Logic
IDC24	DC or AC Input, 10-32 VDC or 12-32 VAC, 24 VDC Logic
IDC5	DC or AC Input, 10-32 VDC or 12-32 VAC, 5 VDC Logic
IDC5B	DC or AC Input, 4-16 VDC/VAC, 5 VDC Logic High Speed
IDC5D	DC Input, 2.5-28 VDC, 5 VDC Logic
IDC5G	DC or AC Input, 35-60 VDC/VAC, 5 VDC Logic

	Click for AC data sheet
	Click for DC data sheet

DC Output
ODC15	DC Output, 5-60 VDC, 15 VDC Logic
ODC15A	DC Output, 5-200 VDC, 15 VDC Logic
ODC24	DC Output, 5-60 VDC, 24 VDC Logic
ODC24A	DC Output 5-200 VDC, 24 VDC Logic
ODC5	DC Output, 5-60 VDC, 5 VDC Logic
ODC5A	DC Output, 5-200 VDC, 5 VDC Logic

	Click for data sheet

Dry Contact
ODC5R	Dry Contact (Reed Relay) Output, 5 VDC Logic
	Click for data sheet

Output Switch
OUTPUT SWITCH	Output Switch, 250 VAC
	Click for data sheet

Input Switch
INPUT SWITCH	Input Switch, 5, 15, or 24 VDC Logic
	Click for data sheet

4-channel Switch Assembly
PB4MOA	4-channel Switch Assembly
	Click for data sheet

Fuse
FUSE05	5-amp Fuse For Standard Digital Output Modules

All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical isolation between the field inputs and the logic output of the circuit.

Each module provides up to 4000 volts (transient) of optical isolation between the field devices and the control logic. This module is equivalent to a single pole, single throw, normally open contact (FORM A, SPST-NO, Make). All AC output modules feature zero voltage turn-on and zero current turn-off.

All AC and DC input modules have a bridge-rectifier input. Each module provides up to 4000 volts (transient) of optical isolation between the field inputs and the output side of the circuit.

TheDC output module is used for controlling or switching DC loads of 5-60 VDC. Each module provides 4000 volts (transient) of optical isolation between the field devices and the control logic.